

浏览全部资源
扫码关注微信
1. 西安理工大学省部共建西北旱区生态水利国家重点实验室,西安,710048
2. 西安理工大学水利水电学院,西安,710048
Published:2022
移动端阅览
JIANG Ruirui, FEI Liangjun, KANG Shouxuan. Numerical Study on the Characteristics of Multi-point Interference Infiltration Wetted Body in Muddy Water Film Hole Irrigation[J]. 2022, 36(4): 190-195.
JIANG Ruirui, FEI Liangjun, KANG Shouxuan. Numerical Study on the Characteristics of Multi-point Interference Infiltration Wetted Body in Muddy Water Film Hole Irrigation[J]. 2022, 36(4): 190-195. DOI: 10.13870/j.cnki.stbcxb.2022.04.024.
为了研究浑水膜孔灌不同膜孔直径对多点源交汇入渗湿润体特征的影响,设置4种不同大小的膜孔直径,通过室内试验,在膜孔灌入渗方式下,测量不同膜孔直径多向交汇湿润体特征的变化过程。结果表明:膜孔直径越大,相同入渗时间内水平和垂直湿润锋运移距离越大;自由入渗剖面,水平和垂直湿润锋运移距离均与入渗时间符合幂函数模型,运移参数随膜孔直径的增大而增大,运移指数则减小;交汇剖面水平和垂直湿润锋运移距离与入渗时间符合对数函数模型;随着膜孔直径的增大,膜孔周围土壤含水率均接近土壤饱和含水率,其他相同位置土壤含水率增大,发生单向交汇和多向交汇的时间逐渐减小;浑水膜孔灌湿润体内灌水均匀系数均大于90%,灌水均匀度非常高。
The objective of this study was to explore the effect of different film hole diameters on the characteristics of multi-point interference infiltration wetting body
a testing program of laboratory experiment with four different film hole diameters was designed
the changes in the characteristics of the wetting body with time under different film hole diameters were measured. The results showed that at the same time
the larger the film hole diameters
the greater the horizontal and vertical wetting front transport distance. The power function model was suitable for characterizing the relationship between the horizontal and vertical wetting front transport distance on the free infiltration surface and the time of infiltration. As the diameter of the film hole increased
the transport parameters gradually increased and the transport indexes gradually decreased. The relationship between the horizontal and vertical wetting front transport distance and the infiltration time were logarithmic function model on the intersection profile. As the diameter of the film hole increased
the soil moisture content around the film hole was close to the saturated
and the soil moisture content at the same locationincreased
and the time of unidirectional and multidirectional interference to occur gradually decreased. The irrigation uniformity coefficient in the wetting body of muddy water with film hole irrigation was greater than 90%
and the irrigation uniformity was very high.
张振龙, 孙慧, 苏洋, 等.中国西北干旱地区水资源利用效率及其影响因素[J].生态与农村环境学报, 2017, 33(11):961-967.
韩琦, 姜纪沂, 李瑛, 等.西北干旱半干旱区水资源承载力研究现状与发展趋势[J].节水灌溉, 2017(6):59-62, 67.
任新茂, 孙东宝, 王庆锁.覆膜和种植密度对旱作春玉米产量和蒸散量的影响[J].农业机械学报, 2017, 48(1):206-211.
Zhang P, Wei T, Han Q F, et al. Effects of different film mulching methods on soil water productivity and maize yield in a semiarid area of China[J].Agricultural Water Management, 2020, 241:e106382.
Xie Z K, Wang Y J, Li F M. Effect of plastic mulching on soil water use and spring wheat yield in arid region of Northwest China[J].Agricultural Water Management, 2005, 75(1):71-83.
徐首先, 魏玉强, 聂新山, 等.膜孔灌溉理论与实用技术初步研究[J].水土保持研究, 1996, 3(3):23-30.
李方红, 李援农, 王增红, 等.膜孔灌溉技术研究的现状及展望[J].西北农林科技大学学报(自然科学版), 2005, 33(4):127-131.
刘洪祥, 徐首先.节水高产优质高效的灌水技术:膜孔灌[J].灌溉排水, 1997(3):63-64.
刘利华, 费良军, 陈琳, 等.膜孔直径对浑水膜孔灌土壤水氮运移特性的影响[J].水土保持学报, 2018, 32(3):126-131.
马孝义, 范严伟, 王术礼, 等.膜孔灌平均入渗水深简化计算模型建立与验证[J].农业机械学报, 2009, 40(8):67-73.
姜瑞瑞, 费良军, 傅渝亮, 等.多因素浑水膜孔灌入渗特性分析[J].排灌机械工程学报, 2020, 38(4):415-420.
费良军, 朱兴华, 吴军虎.膜孔灌多向交汇入渗减渗特性和数学模型研究[J].水利学报, 2006, 37(1):104-108.
李发文.膜孔灌溉交汇入渗特性及其影响因素研究[D].西安:西安理工大学, 2002.
呼唤, 程东娟, 高然, 等.膜孔灌多向交汇入渗交汇界面面积特性和数学模型研究[J].节水灌溉, 20124(4):26-29.
李毅, 关冰艺.滴灌两点源交汇入渗的斥水土壤水分运动规律[J].排灌机械工程学报, 2013, 31(1):81-86.
孙海燕, 王全九.滴灌湿润体交汇情况下土壤水分运移特征的研究[J].水土保持学报, 2007, 21(2):115-118.
卞艳丽, 曹惠提, 张会敏, 等.不同泥沙级配浑水灌溉入渗量及减渗作用分析[J].人民黄河, 201537(3):145-148.
王全九, 王文焰, 邵明安, 等.浑水入渗机制及模拟模型研究[J].农业工程学报, 1999, 15(1):141-144.
张林, 吴普特, 范兴科.多点源滴灌条件下土壤水分运动的数值模拟[J].农业工程学报, 2010, 29(9):40-45.
宰松梅, 仵峰, 温季, 等.大田地下滴灌土壤水分分布均匀度评价方法[J].农业工程学报, 2009, 25(12):51-57.
中华人民共和国水利部.节水灌溉工程技术规范:GB/T 50363-2006[S].北京:中国计划出版社, 2006.
0
Views
734
下载量
2
CSCD
Publicity Resources
Related Articles
Related Author
Related Institution
京公网安备11010802024621